Revolver Disc is designed, handmade & distributed by Harry Walker in the UK.

Horizontal Shift Bar


0 out of 5

Horizontal Shift Bar for use with 10, 15 and 20 degree risers.

This accessory will achieve a forward or backward tribar rest/pad shift of between 20 to 30mm depending on the tribar mount bolting centres.  This shift is fixed and does not slide, for example –

20mm mount bolt centres = 30mm of shift
25mm mount bolt centres = 25mm of shift
30mm mount bolt centres = 20mm of shift

The bar is drilled and slotted for the use of M5 bolts but M4 will also fit.  M6 bolts would require the bar to be re-drilled using a 6mm drill bit.  The shift bar is intended to be used with our 10, 15 or 20 degree wedges to help achieve the perfect tribar position but may be possible to use with other tribar rests.

Category: .

Additional information


10 Degree, 15 Degree, 20 Degree

Horizontal Shift Bar

With Horizontal Shift Bar, Without Horizontal Shift Bar


There are no reviews yet!

Be the first to write a review


Lead Time

There is a 2 to 4 week lead time for all Revolver Wheels and 1-2 weeks on all arm rests’


We are happy to offer an exchange or refund. Perhaps the item is not what you want, it doesn’t fit, or maybe you’ve just changed your mind. As long as your items are unused, in their original packaging and returned within 28 days of receipt, just send it back.

Please note, unwanted items are returned at the buyers expense.

If you return an item because it is not as described or it’s damaged, we will replace the item or issue a full refund by the payment method that was received.


Extent of Limited Warranty warrants its products to be free from defects in materials or workmanship for a period of two years after original purchase. This warranty only applies to the original owner and is not transferable. Claims under this warranty must be made through the retailer where the wheel was purchased or direct to the Wave Lenticular Ltd via e-mail. Original proof of purchase is required.

Limitations of Liability

To the extent allowed by local law, except for the obligations specifically set forth in this warranty statement, in no event shall Wave Lenticular Ltd. or its third party supplies be liable for direct, indirect, special, incidental, or consequential damages.

Limitations of Warranty

  • This warranty does not apply to products that have been incorrectly installed and/or adjusted.
  • This warranty does not apply to damage to the product caused by a crash, impact damage, abuse of the product, non-compliance with manufacturers specifications of usage or any other circumstances in which the product has been subjected to forces or loads beyond its design.
  • This warranty does not apply when the product has been modified.
  • This warranty does not apply when the serial number or production code has been deliberately altered, defaced or removed.
  • This warranty does not apply to normal wear and tear. Wear and tear parts are subject to damage as a result of normal use.
  • This warranty shall not cover damages caused by the use of parts of different manufacturers. This warranty shall not cover damages caused by the use of parts that are not compatible, suitable and/ or authorized by Wave Lenticular Ltd.

Contact Harry Walker

Wave Lenticular Ltd
34 Rowan Drive
Newcastle Upon Tyne
NE20 9QL
United Kingdom

p: 07502 947457

Wave Lenticular Design

Using our “Wave Lenticular Design” to it’s full effect, the Revolver’s wide rim platform allows the use of wider 23mm plus+ tyres with lower rolling resistance, while maintaining maximum aerodynamic performance. An unbeatable combination.

About Revolver Disc

Revolver Disc is designed, manufactured & distributed by Harry Walker, Wave Lenticular Ltd.

Follow Us