REVOLVER PROROK CARBON FIBRE TRIBAR ARM RESTS
A versatile anatomical arm rest which lends itself to all Tribar positions from a traditional level forearm to the currently popular upright ‘Mantis’ positions. With a simple yet clever design these rests will rotate around our alloy base ‘Rok’ washers to achieve a side support height of anywhere between a balanced 20mm inner & outer support rotating up to a 50mm outer support height while maintaining the same virtual armrest width.
Designed with both Professional and amateur riders in mind the ProLock are 2019 UCI compliant at the maximum 125mm permitted length. Rests this length can help assist a rider in adopting slightly higher hands when trying to achieve a ‘Mantis’ position while remaining within the positional parameters laid down by the UCI.
The ProRok can be supplied blank (undrilled) or pre-drilled to set at a choice of two outer side heights – 30 or 40mm. Any other degree of rotation (up to 50mm) can be drilled after sale, a simple task for a cycle mechanic. The Pre-drilled holes are suitable for M5 countersunk Allen bolts in a fore/aft configuration for Tribar mounting centres of between 25 & 30mm, again a competent mechanic could easily make alterations for other bolt sizes or mount centres.
The base area of the rest throughout the recommended fixing rotation range is 4mm thick tapering down to 2mm at the outer/inner upstands for maximum rigidity which aids control.
ProRok Arm Rests are supplied with left and right 8mm Neoprene foam pads along with 4x alloy ‘Rok’ radius washers (required) which will sit onto any flat mount surface.
|Rests||100% Carbon Fibre/Epoxy Resin =- 3k plain weave finish|
|Thickness||4mm tapered to 2mm|
|Rok (radius)||16mm Washers / CNC Machines 6082 T6 Aluminium, Black Anodised|
|Bolts||Stainless Steel M5 x 12mm countersunk Allen Bolts|
|Pads||Left & Right 8mm Neoprene foam, black|
Only logged in customers who have purchased this product may leave a review.