20 Degree Arm Rest Risers
£40.00
A solution to uncomfortable riding in an upward angled forearm or ‘Mantis’ position.
These 20 degree risers will convert most level-set integrated cockpits into the ergonomic angled platform required to perform at your best in an aero optimised raised hand tribar position.
These risers are CNC machined from hard wearing 6000 series Aluminium (black anodized) and are available from stock in 20 degrees and to special order at 10 & 15 degrees. Angles can be fine tuned by using spacer washers (supplied) which also may be required to avoid obstruction depending on final fore-aft rest positioning. Compatible with single and twin bolt fixing points between 20mm & 30mm centres. Depending on your existing set-up you may require longer Allen bolts particularly at the front of the riser. It is very important that you do not re-use your existing bolts if they are too short for purpose as this could result in tribar failure and serious injury. If in doubt do not use as longer bolts can be supplied free if exact sizes are given when ordering.
Weight 22g
Lead Time
There is a 2 to 4 week lead time for all Revolver Wheels.
Returns
We are happy to offer an exchange or refund. Perhaps the item is not what you want, it doesn’t fit, or maybe you’ve just changed your mind. As long as your items are unused, in their original packaging and returned within 28 days of receipt, just send it back.
Please note, unwanted items are returned at the buyers expense.
If you return an item because it is not as described or it’s damaged, we will replace the item or issue a full refund by the payment method that was received.
Warranty
Extent of Limited Warranty warrants its products to be free from defects in materials or workmanship for a period of two years after original purchase. This warranty only applies to the original owner and is not transferable. Claims under this warranty must be made through the retailer where the wheel was purchased or direct to the Wave Lenticular Ltd via e-mail. Original proof of purchase is required.
Limitations of Liability
To the extent allowed by local law, except for the obligations specifically set forth in this warranty statement, in no event shall Wave Lenticular Ltd. or its third party supplies be liable for direct, indirect, special, incidental, or consequential damages.
Limitations of Warranty
- This warranty does not apply to products that have been incorrectly installed and/or adjusted.
- This warranty does not apply to damage to the product caused by a crash, impact damage, abuse of the product, non-compliance with manufacturers specifications of usage or any other circumstances in which the product has been subjected to forces or loads beyond its design.
- This warranty does not apply when the product has been modified.
- This warranty does not apply when the serial number or production code has been deliberately altered, defaced or removed.
- This warranty does not apply to normal wear and tear. Wear and tear parts are subject to damage as a result of normal use.
- This warranty shall not cover damages caused by the use of parts of different manufacturers. This warranty shall not cover damages caused by the use of parts that are not compatible, suitable and/ or authorized by Wave Lenticular Ltd.
Related Products
-
Giant Trinity Advanced CNC machined carbon fibre tribar riser brace. A simple but effective way to stiffen the Giant’s tribar riser stack. This can be used with your existing arm rests but is also great to combine with our Ergo Mantis and Trad regular paired models.
-
Ergo Mantis & Trad Models
The Ergo Mantis Carbon Fibre arm rest models have been developed to accommodate riders who use the popular upright forearm or ‘Mantis’ Tribar position. The majority of riders who visit the Wind Tunnel or undergo Aero specific track testing to improve their cda figure will adopt this position to some degree. The optimum upward angle of the forearm will differ between riders due to influencing factors such as body shape and flexibility. There’s no set rule to follow here.
Trad Carbon Fibre arm rest models are intended for a more traditional tribar position adopting a level forearm. These models are available in a 195mm wide mono platform as well as regular individual arm rests for wider elbow positions. These models have a semi-high sided ergonomic design so still maintain a safe and easy engagement but don’t have the raised back featured on the Ergo Mantis models. Both options are universal but need to be drilled to suit fitments locations. We recommend that Allen bolt holes are counter sunk to allow a more comfortable user fit. Existing Allen bolts should be suitable for re-use.
-
We now offer a range of waxed chains and a wax treatment service for riders wanting to take the advantage of saving every watt come race day. Chains which have undergone our in-house FrictionLESS optimisation treatment result in a typical power saving of 3-5 watts over a new chain of the same model and 1-3 watts over the best traditional wet or dry lubed chains. This represents great performance value for money when measuring the cost of gains against equipment upgrades anywhere on your bike.
You can send us your own chain or have a purchased chain order sent directly to us or select from the chain model options below. If you require a chain that isn’t listed here please contact us for a custom quote and we will be happy to accommodate.
Drive-train compatibility- KMC chains are Shimano, Sram and Campagnolo compatible. Dura Ace are compatible with Shimano drive-trains only.
CHAIN MODEL
FrictionLESS treatment……………………£30
KMC X10 – with quick link…………………£45
KMC X11 – with quick link…………………£50
KMC X10sl – with quick link………………£68
KMC X11sl – with quick link………………£75
Dura Ace 11 HG901 – with pin……………£75
FrictionLESS top up Formulation………..£ 9All prices include VAT
All chains subject to £2.95p UK Postage.
Reviews
There are no reviews yet!